Meego For Nokia N900 is updated regualarly. As we all know the Nokia N900 is the first ARM device for Meego.

Now the updated version is 1.0.90.2.20100910.1

Here we bring the video preview of Meego Handset UX.

Have a look at the video after the break..

www.youtube.com/watch?v=uO0VoHtVdY8

Track the Builds Here at Meego Repo’s

Via amandahoic and Camb078

Meego Developer Preview for Handset is available for download. But Nokia N900 version is not yet released.fatalsaint from Meego Forum gives us the steps to get Meego Preview in Nokia N900.

www.youtube.com/watch?v=XtQsOb6mO0A

WARNING:

Dont try this if you dont know what you are doing…

These steps work for Ubuntu 10.04, Lucid Lynx. N900 + MicroSD card required. Flasher-3.5 required. For Fedora, use the wiki, but compile the flasher from GIT, not the repo, and use my m-i-c command in the script below.

1) grab the N900 MeeGo kickstart file from here.
2) Move it to where you will be building all of this. If you copy/paste from my script below, that’s going to be in ~/build
3) Add the Ubuntu MeeGo repositories to /etc/apt/sources.list.

deb http://repo.meego.com/tools/repos/ubuntu/9.10/ /

4) Script. Copy/paste this to a terminal.

#Create work area
mkdir ~/build
cd ~/build
#Get python-elementtree
wget http://mirrors.kernel.org/ubuntu/pool/universe/e/elementtree/python-elementtree_1.2.6-14_all.deb
sudo dpkg -i python-elementtree_1.2.6-14_all.deb
sudo apt-get update
#install syslinux and dependencies
sudo apt-get install syslinux=3.85
sudo apt-get install mtd-utils qemu-arm-static git-core
#build latest meego-image-creator, the one in the repositories don't work
git clone git://gitorious.org/meego-developer-tools/image-creator.git
cd image-creator
sudo tools/mic-check-alldeps
make clean
make
sudo make install
cd ..
#create N900 image
sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=raw --arch=armv7l --save-kernel --config=meego-handset-armv7l-n900-nokia-closed-1.0.80.8.20100630.ks

5) Connect your booted N900 to your computer. Select “Mass Storage mode”. In Ubuntu, determine which device it assigned your SD card. Mine did /dev/sdc.
6)Copy filesystem to N900 SD card. Replace “DEVICE” with your N900 External SD Card device (change XXXX’s).

sudo dd bs=4096 if=meego-handset-armv7l-n900-nokia-closed-1.0.80.8.20100630-1.0.80.20100630.XXXX-raw/meego-handset-armv7l-n900-nokia-closed-1.0.80.8.20100630-1.0.80.20100630.XXXX-sda.raw of=DEVICE

7)Mount the SD card, replace /dev/sdc1 with your device and first partition.

mkdir mount
sudo mount /dev/sdc1 mount

8)Edit rc.local:

sudo vi mount/etc/rc.local

9)Add the following line, above the touch line

echo 255 > /sys/class/backlight/acx565akm/brightness

10)Unmount

sudo umount mount

11)Disconnect and shut off N900.
12)Run flasher (change XXXX’s)

sudo flasher-3.5 -l -b -k meego-handset-armv7l-n900-nokia-closed-1.0.80.8.20100630-1.0.80.20100630.XXXX-vmlinuz-2.6.35~rc3-119.1-n900

13)When prompted for USB device, connect N900, turn on and hold “u”

References

http://wiki.meego.com/ARM/Creating_A…_Image_Creator
http://wiki.meego.com/Image_Creation…inary_Packages
http://talk.maemo.org/showthread.php…555#post736555

Thanks Faintsaint

As we reported before Meego V1.1 for handset preview version is out just before. We found a video of  Meego previewed in Aava mobile

Read after the break for video

www.youtube.com/watch?v=EW5wpg5epMs

This video shows Early build (Developer Preview) of MeeGo running on a handset (Aava) which is not feature complete.